SKF 6418 Deep Groove Ball Bearing - 90 mm ID, 225 mm OD, 54 mm Width, Cylindrical Bore, Normal apollo_pick retaining bushings and sleeves in

retaining bushings and sleeves in housings and on shafts

They feature a 72 tooth ratcheting mechanism giving a 5° swing arc for greater speed

9Ah (Recommend NBP2) Flow Rate 4 CFM Ultimate Vacuum 15 micron Pump Design Dual-Stage

Bore Diameter 40 mm Outside Diameter 90 mm Overall Width 23 mm Thrust Bearing Type Single-Direction Outside Diameter Design Straight Precision Rating Not Rated Static Load Capacity 170 kN Dynamic Load Capacity 64 kN Operating Temperature Range Maximum of +120 °C Maximum RPM 7000 RPM Cage Material Nylon Fillet Radius 1

SKF 6418 Deep Groove Ball Bearing - 90 mm ID, 225 mm OD, 54 mm Width, Cylindrical Bore, Normal apollo_pick retaining bushings and sleeves inDeep Groove Ball Bearing Deep Groove Ball Bearings are versatile and widely used bearings. They can accommodate radial loads and, to a lesser extent, axial loads in both directions. Known for their low friction and quiet operation. Manufactured to precision tolerance class for demanding applications. Robust steel cage construction ensures durability. Suitable for use in a wide range of industrial applications where reliability and performance are