Wera 7400 series Kraftform Torque screwdrivers, with factory pre-set value (0.1-1.5 Nm) and Rapidaptor quick-release chuck, handle size 89 mm 05074794001 Refrigerant Recovery Unit The 3-jaw universal puller is

The 3-jaw universal puller is used for pulling bearings

Magnetic Strip Sockets SAE: 9/16”

so it can turn fasteners in very tight spaces Up to 50% thinner than standard ratchets to give you greater access Up to 40% stronger than standard ratchets Pass-Thru™ system works over any length threaded rod

with a maximum effective arm length of 200 mm (7

Wera 7400 series Kraftform Torque screwdrivers, with factory pre-set value (0.1-1.5 Nm) and Rapidaptor quick-release chuck, handle size 89 mm 05074794001 Refrigerant Recovery Unit The 3-jaw universal puller isWera torque screwdriver. With a factory pre set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off the shelf torque tester. Unlimited loosening torque for slackening stuck screws.